Stout X-Band Contractor Kit STX-250C

The STX-250C X-Band Saw Contractor Kit includes the innovative Stout X-Band cordless band saw, two rechargeable batteries,  1 hour rapid charger, and a molded carrying case.

This kit does not include the Stout X-Band benchtop cutting station, but it is available from ToolKing.com as an add-on accessory here.

Stout X-Band Saws are operated by placing its blade against a firmly held workpiece at the area intended to be cut. This allows the blade to rest on the target cut area, while the workpiece is resting against the saw fence. Keep in mind that the rotation of the blade will draw itself through the workpiece before passing through the fence. Ensure at least two teeth of the blade engage the work piece. When the workpiece and saw are properly aligned, push the Trigger Safety Switch forward with the thumb and depress the Trigger Switch; the blade will begin removing material as it cuts allowing the operator to release the Trigger Safety Switch and hold the Trigger Switch. When the cutting operation is complete, maintain control of the saw after releasing the Trigger Switch and until the blade comes to a complete stop.

One Hand Operation
Sealed Bearings
Lightweight Design
Cordless
21,000 RPM Motor
Steel Planetary Gear Reduction
2. 0 AH
Slide in Batteries
1 Hr. Fast Charger

X-Band saw
Two 18V NiCd batteries
One-hour charger
Molded carrying case
14/18 TPI Bi-Metal Blade

Sawing