ToolKing.com Logo
Empower someone with a ToolKing.com Gift Card. Click here.

Hobart 500521A Factory Reconditioned Handler 125EZ Welder - A Stock

Availability: Out of stock Stock Level: Sold out
Hobart
Reconditioned
Within 24 Hours
This item is fulfilled by Tool King LLC and usually ships within 24 hours of ordering if ordered on a business day before 3:00pm (Mountain Time)

The Hobart 500521A Factory Reconditioned Handler 125EZ Flux Cored Welder features a unique single-knob control that makes it extremely simple to set up and easy to use.  The Handler 125EZ comes ready to weld 18 Gauge to 3/16-Inch thick mild steel with .030-inch (0.8 mm) self-shielding flux-cored wire so it does not require a separate shielding gas bottle.   It can also use .035-inch (0.9 mm) flux cored wire with a .035-inch (0.9 mm) contact tip.

Features:

  • Simply adjust the knob to select the thickness of mild steel to be welded and you're ready to weld
  • Single knob adjusts both the volts and wire feed speed for added eas
  • 125 Amps of power allow you to weld 18 Gauge up to 3/16-inch steel with flux cored wire
  • Built-in contactor for easy use is also an excellent safety feature which makes wire electrically "cold" when not welding
  • Durable feed head with quick-release drive roll tension lever provides positive feed with adjustable tension plus easy accessibility to thread new wire
  • Short circuit protection feature helps to protect the unit against current overload
  • Self-resetting thermal overload and motor protection prevents overheating, extending the life of the welder
  • Self-resetting motor protection helps to protect wire feed system from overload without fuses to change or circuit breaker buttons to reset

What's In The Box:

  • Hobart 500521AR Handler 125EZ Flux Cored Welder
  • H-9A Gun with 8-Foot (2.4 m) Cord
  • 10-Foot (3 m) Work Cable with Clamp
  • Spare .030-Inch (0.8 mm) Contact Tips
  • Sample Spool of .030-Inch (0.8 mm) Self-Shielded Flux Cored Welding Wire
  • Spool Shaft to Accommodate 4-Inch Spools
  • Power Cord with Plug
SKU 51700061
Manufacturer Hobart
Model 500521A
Item Condition Reconditioned
Shipping Weight (Pounds) 53.6000
Item Weight (Pounds) 53.6000
Operating Input Voltage 110 volt / 120 volt @ 60hz (North America)
Power Used (Amps) 30 - 125
Duty Cycle 90 A at 19 VDC and 63 A at 21 VDC at 20% Duty Cycle
Mig? No
Max Weld Thickness 3/16-inch in Mild Steel
Gun Cable Length 8-foot
Related Categories

Questions on Hobart 500521A Factory Reconditioned Handler 125EZ Welder - A Stock

  • From EARL VALYOU at 9/14/11 4:24 PM
    • CAN I WELD ALUMINUM WITH THE HOBART 125EZ
    • ToolKing.com does not recommend using the Hobart 125EZ to weld aluminum as you are not able to use the machine with an aluminum spool gun. While pushing the soft aluminum wire through the lead can be done, it is extremely hard and can cause the soft wire to back up in the machine.
      You would be best served by checking out the Hobart Weld Talk web page by using this link in your browser - http://www.hobartwelders.com/weldtalk/

  • From Jeff at 10/21/10 4:36 PM
    • Can this be upgraded to the larger spool?
    • Yes, you can use the 8-inch spool kit on the Hobart 500521A Factory Reconditioned Handler 125EZ Welder - A Stock. You can find that on ToolKing.com by jumping here - http://www.toolking.com/hobart-195216-8-inch-spool-hub-kit

  • From Gary at 3/2/10 9:55 AM
    • Can this welder be set up for use with gas?
    • The Hobart 500521A Factory Reconditioned Handler 125EZ Welder - A Stock is not able to be set up for use with gas as the Hobart 125EZ unit has no gas connections.

  • From Mike at 2/9/10 6:02 PM
    • Does this welder come with a warranty and if so, what are the details?
    • With this Hobart 500521A Reconditioned Handler 125EZ Welder - A Stock, being an "A Stock" unit means that it will have a manufacturing date of two years or less, it will come with a warranty of one year or the remainder of the Hobart five year warranty, whichever is greater.

Ask Your Own Question

For customer service or general inquiries use our contact form.






Hobart 500521A Factory Reconditioned Handler 125EZ Welder - A Stock

  • Hobart 500521A Factory Reconditioned Handler 125EZ Welder - A Stock
Sponsored Ads
51700061--BMKHH-H-H

Related Items

Customers Who Bought This Also Bought

Hobart 500521A - Customer Reviews

  1. Does what it says it will do.
    Review by SQ bottle
    Rating:

    I was a little leery about a 120 volt welder. I have borrowed one (different brand) from a friend of mine and it was tough to weld with. But since I was only going to be doing light gauge, auto body type welding I thought I would give this one a try. This thing welds great, just set the dial and pull the trigger. Even though it was reconditioned I couldn't find a scratch on it, looks new to me and it has a full warranty. What more do you want for this price! (Posted on 3/18/11)


    Do you find this review helpful?
    (36 of 57 people found this review helpful)
  2. A good little welder
    Review by Phil
    Rating:

    I bought one of these reconditioned in January and it has served me well. I use it at home and have already gone through about 3 lbs. or 0.030 wire. I have been welding #8 square cut concrete nails for religious artwork. Recently I made a nutcracker for macadamia nuts using 3/16" x 3/4" stock, 5/8" x 5/8" stock, and 5/16" rod. I preheated some of the heavier welds with a MAPP gas home hobbyist torch. I got better welds from a small machine than I could ever have expected. Unless you need gas shielding, this is a good machine to consider. I have never regretted buying mine. (Posted on 10/18/10)


    Do you find this review helpful?
    (32 of 53 people found this review helpful)
  3. A great little welder, especially for the home workshop
    Review by Philip
    Rating:

    Most of the time I weld smaller, thinner items. Lately I have been making religious art from 8 lb. square cut concrete nails. This welder makes it easy. Recently I also made a heavy-duty nutcracker from 3/16" x 3/4" stock, 5/16" rod, and 5/8" x 5/8" bar stock. Normally I would think this welder to small for pieces this heavy, but I preheated some of the heavier welds with a home MAPP gas torch and got good welds with good penetration. A self-darkening hood is a good accessory for using this welder. I have had the welder about 9 months now and have run about 3 lbs. of 0.030 wire through it. I do not regret its purchase in any way. It is a very handy tool to have in my workshop. I like getting a factory reconditioned unit for less than the full retail price normally charged for this model. (Posted on 10/18/10)


    Do you find this review helpful?
    (32 of 54 people found this review helpful)
  4. A great welder at a fantastic price.
    Review by Dave
    Rating:

    I bought a 're-conditioned' welder assuming there would be some signs of wear, nothing, it looks like new. What a deal, a welder that looks and performs like new for half the price. I used it to build a welder cart so I can wheel it around. My first welds weren't great but got better as I practiced. Next, I'll be practicing on sheet metal , getting ready to repair the floorpan of my Jeep. Thansk ToolKing for a fantastic deal. (Posted on 11/13/10)


    Do you find this review helpful?
    (25 of 46 people found this review helpful)
  5. Great Item
    Review by Philbrook LandWorks and Design
    Rating:

    This item is used to make repairs to landscaping equipment that is used daily. This welder makes repairs easy with only one adjustment needing to be made between repair jobs. I have spoken with several professional welders who all agree that this item is a great buy. (Posted on 4/27/11)


    Do you find this review helpful?
    (25 of 44 people found this review helpful)
  6. Excellent Welder at an Excellent Price
    Review by Morgaj1
    Rating:

    This is the second reconditioned tool that I have ordered from ToolKing and have been more than impressed each time. The welder looked and operated like brand new. This welder has the easiest loading gun and spool tensioner. It is very easy to set up. I have stick welded in the past but never wire welded. That is why I chose this model, as it is a piece of cake to set up. Just dial in the thickness of the metal and it automatically set the wire speed and amperage. It has more than ample power for what I need. The Hobart flux core wire is top notch. It welds with very little spatter. You will not find a better deal on a 125 amp flux core welder. (Posted on 2/3/11)


    Do you find this review helpful?
    (24 of 46 people found this review helpful)

Customer Top Picks