| More Info-SawStop ICS51230: | Cabinet footprint: 20" w x 25" d Cast iron table: 24" w x 30" d, 44" w x 30" d (w/ extension wings) Extension wing: 10" w x 30" d Extension table (optional): 24" w x 30" d (36" rails), 40" w x 30" d (52" rails) Blade: 60-tooth, professional grade, 5/8" arbor Blade diameter: 10" Blade tilt: Left Blade kerf: 3mm Blade plate thickness: 2mm Max. depth of cut, blade at 0º: 3 1/8" Max. depth of cut, blade at 45º: 2 1/4" Max. rip, right of blade: 52 1/2" (with optional 52" rails) 36 1/2" (with optional 36" rails) Max. rip, left of blade: 12 1/2" Dado diameter: 8" (requires a separate brake cartridge) Dado max. width: 13/16" Arbor diameter at blade: 5/8" Main bearing size: 62mm OD x 30mm ID Second bearing size: 52mm OD x 25mm ID Table in front of blade (max. elevation): 11" Table behind blade (max. elevation): 9 3/4" Arbor Runout: 0.001" Maximum Allowable Runout Blade Lateral Movement Over Full Elevation Range: 0.006" Maximum Table Flatness Measured Diagonally: 0.010" Maximum Gap Overall Table and Extension Wing Flatness: 0.025" Maximum Gap Blade Alignment with Miter Slot: 0.010" Maximum displacement Deviation of Miter Gauge Indexing Stops from actual: ±0.25º Alignment between Splitter and Blade: 0.010" Maximum difference Miter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deep, 11 1/8" center-to-center, 5 1/2" (arbor flange to center of right slot) Dust collection port diameter: 4" Riving knife / splitter thickness: 2mm Blade guard: polycarbonate, extends only 5/8" to right of blade Insert: zero clearance, phenolic core, melamine surfaces Hand wheels: 8" diameter, cast iron with chrome handle Belts: 2 V-ribbed belts Motor: (all 50-60Hz, TEFC) 5 hp, 1 phase, 230 V, 20.5 A (optional) |